Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing

Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing Board Integrated OSD Module for 2-8 axis Features: 1. High Configuration: STM32F722RET6 master, ICM42688 gyroscope, SPL06-001 barometer 128MB flight log data storage, MPS brand MP2491C switching power supply chip. 2. Optimal PCB layout and alignment: repeated optimization of PCB layout alignment, to achieve the perfect combination of high current and low noise, to ensure the accuracy of the sensor. 3. Multi-model transmission support: standard Dali 6pin transmission interface, snail transmission interface, built-in analog transmission OSD. 4. 3.3V/4.5/5V/12V multi-voltage power supply. 12V transmission power supply can be turned on and off by remote control. 5. Rich interfaces. Support eight-way motor X8 models. Standard sockets and pads all lead out, convenient for users with different needs. 6. Support all kinds of mainstream throttle signals to support the ESC information back to the perfect support for two-way DShot digital throttle communication, OneShot and ordinary PWM signals. 7. Built-in OSD module, one-step parameterization, F722 integrated OSD chip, without external OSD module, you can directly set the OSD parameters in the flight control parameterization software and RC, real-time graphical display of OSD information, such as the direction of flight and the position of the aircraft. 8.  55A 4-IN-1 ESC,3-6S LiPo, Mounting hole size: 30*30 mm ,M3. Description: F722 Flight controller: has been designed for optimal control of flight, which allows you to have more control over the flight. Supported models: fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor airplanes including X8 models, and various types of user-made multi-rotor models. Specifications: Brand: Bluejay Name: 55A 4-IN-1 ESC Input voltage: 3-6S LiPo (11.1-25.2V) Continuous Current: 55A x 4 Instantaneous current ： 70A x 4 (10s) Built-in BEC : No Built-in current sampling: Yes, 11.75mv/A Mounting hole size: 30*30 mm ,M3 Dimension: 45*45*6 mm Weight: 33g (with cable) Brand: Radiolink Name:  F722 flight controller Main Processor: STM32F722RET6 Gyro: ICM42688 barometer: SPL06-001 Barometer: BMP280 Black Box: 128MB flight log data storage Switching power supply chip: MP2491C Multi-voltage power supply: 3.3V/4.5/5V/12V Weight: 9.5g for single F722 flight controller Ounting hole distance: 30.5*30.5mm OSD Chip: AT7456E Motor Channel: M1-M8 DJI sky terminal plug-in: support Analog Mapping Inline: Support Betafight Camera Adjustment Pad: Supported Voltage scaling: 110 Number of serial ports: 5 sets of serial ports: Supported ESC Operational Test Input: Support 12C: Supported LED pads: Supported Buzzer Pad: Support RSSI signal pinout: Support Firmware type: Betaflight Firmware Name: RADIOLINKF722 USB Port: 1(Type-c) Controller-by-Controller Signal (RC In port): SBUS/CRSF Mapping OSD: Support, built-in mapping OSD module Supported ESC protocols: PWM/Bi-directional Dshot/Oneshot Power input: 3-6S BEC: 3.3V/300mA;4.5V/500mA;5V/3A;12V/3A 12V BEC Switch: Supported (USER1 setting) Supported models: fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor airplanes including X8 models, and various types of user-made multi-rotor models. Operating temperature: -30~85-C Package contents: 1*F722 Flight Control 1*55A 4-IN-1 ESC     Note: Only the above package content, other products are not included. 1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!