Jumper 2.4G ELRS TX Module AION NANO T-PRO ELRS AION-RX-MINI Receiver for FPV Drone Specification: Product: jumper 2.4G ELRS TX module Model Name: AION TX NANO Screen: OLED screen MCU: ESP32 RF output power: 10-500mw Frequency range: 2.4GHz-2.5GHz Firmware: ExpressLRS Antenna: Directivity diamond antenna for better signal input Working voltage: DC5-8.4v Receive Max Refresh Rate: 500Hz Menu button: 5 direction button Voltage: DC6-8.4V Current: <400mA Port: S port. Firmware update: via Wifi, UBC-C or Blue tooth The specifications: Dimensions: 17.2 x 8.8 x 4.3mm (L x W x H) Weight: 1.1g Number of channels: 16Ch Operating voltage range: 3.5V ~ 6V Operating current: 60mA @ 5V Operating Range: Full Range Distance: >8KM Compatibility: Radios in ELRS 2.4 mode binding procedure: Bonding is the process of attaching a receiver to an RF transmitter/transmitter module. An internal transmitter Or the external RF module can be linked to multiple receivers (do not use simultaneously). A receiver can only be Connected to an RF module. Follow the steps below to finish the binding procedure. 1. Put the Transmitter/RF Transmitter module into link mode 2. Turn on the receiver, the green light on the receiver will flash, and the receiver will be in binding mode. On the radio, The green light on the receiver will always be on and the link is complete. If the receiver is not bound within 20 seconds after power on, the receiver will power on in Wifi firmware upgrade mode, The green light will flash at the same time. Security: Failsafe is a useful feature that is for a preset channel output position whenever the control signal is lost for a period. Follow the steps to configure the required channel security: Failsafe for the receiver, ELRS RF mode settings can be configured through the radio interface, which does not support pulse, hold and customized three modes for each channel. radio go to: Model Setup/Internal RF/Failsafe Package: 1 x Jumper 2.4G ELRS TX Module AION NANO T-PRO 1 x AION-RX-MINI ELRS Receiver
